50 LPH RO Plant | Commercial RO Plant 50 LPH
A compact reverse osmosis water purification system for home, office and small commercial requirements. Actual output and treated-water quality depend on feed-water conditions and system operation.
Image for presentation only. Actual product may differ from the product shown.
50 LPH RO Plant
Technical Details
| Product Type | Wall-mount Water Purifier |
| Purification Technology | Reverse Osmosis (RO) |
| Nominal Capacity | 50 LPH |
| Approximate Daily Output | 500–600 litres (depending on operating hours and water conditions) |
| Raw Water TDS Range | 100–2000 ppm (as stated for this product) |
| Approximate Output TDS | 50–150 ppm; actual result depends on feed water and operating conditions |
| Water Storage | Store treated water in a suitable water cooler or tank |
The RO membrane reduces dissolved impurities. The final water quality and production rate depend on feed-water TDS, pressure, temperature, membrane condition and regular maintenance.
Technical Specifications
| Wall-mount Water Purifier | 1 |
| Reverse Osmosis Technology | Included |
| Anti-bacteria 3-in-1 Silver Doser, Taste Conditioner and Activated Carbon post-treatment | Included |
| Skid made from SS Skelled | 1 |
| Prefilter with CTU block in 20-inch housing | 1 |
| Prefilter in 20-inch housing, 5-micron rating | 1 |
| Prefilter in 20-inch housing, 10-micron rating | 1 |
| RO Pump 110 PSI (125 GPD) | 2 |
| Adaptor | 2 |
| Membrane Housing | 4 |
| Membrane | 4 |
| Low Pressure Switch | 1 |
| Pipeline | Imported pipeline |
| Fitting | 1 set |
| SV Switch | 2 |
| UV Lamp & UV Adaptor (Philips) | 1 |
| Jumbo Housing, 20-inch | 3 |
| Dimensions (W × D × H) | 18 × 10 × 30 inches |
About 50 LPH RO Plant
Compact Reverse Osmosis Water Purification Solution
The 50 LPH RO Plant is intended for applications that need a steady supply of purified water on a smaller scale. The system combines pre-filtration, RO membrane treatment and post-treatment components. Please confirm the feed-water report and installation requirements before purchase.
50 LPH Capacity
Nominal output capacity of 50 litres per hour under suitable operating conditions.
Multi-Stage Treatment
Pre-filtration, RO membrane purification and post-treatment components.
Home & Office Use
Can suit smaller sites with appropriate water demand and storage.
Water-Quality Dependent
Confirm raw-water TDS, pressure and treatment requirements with the supplier.
Before Choosing Your RO Plant
- Check raw-water TDS and overall water quality.
- Confirm daily treated-water demand and storage capacity.
- Discuss installation space, power supply and maintenance.
- Confirm the final configuration based on site conditions.
Free Shipping